Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Hyundai i10?

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Headlight

To replace the left front headlight bulb on a 2018 Hyundai i10, first open the bonnet and remove the screws located on the edge using a Torx key. Once all four screws are removed, you can pull the entire headlight out of its housing. Next, disconnect the connector to remove the bulb holder and replace the bulb. After replacing the bulb, refit the headlight by inserting it back into its housing and tightening all the previously removed screws as shown in the video.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Hyundai I10.
How to replace the headlight bulb of the Hyundai I10.
Hyundai I10 (2007-2013 / PA, MK 1) Below are the instructions on how to disassemble and replace the headlight bulb of the Hyundai I10. First, open the hood of the car and start by remo…
How do you replace the front headlight bulb of the Hyundai I10?
How do you replace the front headlight bulb of the Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the headlight bulb of the Hyundai I10, you need to open the hood so that you can access the components inside it: there will be a molding …
How to replace the bulb in the Hyundai I10 headlight
How to replace the bulb in the Hyundai I10 headlight
Hyundai I10 (2013-2020 / IA, MK 2) Replacing the front headlight bulb of the Hyundai I10 is a simple and quick operation to be carried out independently. The steps to follow are: - ope…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos