Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Hyundai i10

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlight bulb on a Hyundai i10 is a simple and quick task you can do yourself. Follow these steps: - open the bonnet; - unscrew the screws located above the headlight; - remove the headlight from its housing; - open the cover of the light unit; - disconnect the connector from the bulb to remove it; - insert the new bulb; - connect the connector and close the cover; - place the headlight back in its housing; - screw in the central screws and close the bonnet.

To replace the left front headlight bulb, follow the same steps.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to Replace the Front Fog Light Bulb on a 2013 Hyundai I10
How to Replace the Front Fog Light Bulb on a 2013 Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) Replacing the left fog light bulb on a Hyundai I10 involves a few simple steps that you can carry out independently. To replace the bulb, you need to…
How to Replace the Front Headlight Bulb on Hyundai I10
How to Replace the Front Headlight Bulb on Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) To replace the front headlight bulb on the Hyundai I10, open the bonnet to access the engine compartment and rotate the protective cap at the rear of…
How to Replace Front Headlight Bulb on Hyundai I10
How to Replace Front Headlight Bulb on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this very simple video guide, you will learn how to remove the front headlight bulb of a Hyundai I10. The removal process takes a few minutes and …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos