Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on Hyundai I10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Light bulb

To replace the front headlight bulb on the Hyundai I10, open the bonnet to access the engine compartment and rotate the protective cap at the rear of the headlight. Once the cap is removed, you can disconnect the connector at the rear and extract the bulb from its housing. After the old bulb has been removed, connect the new one to the connector and insert it back into its housing, securing the headlight with the appropriate cap. After installation, check the proper functioning of the component.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Front Headlight Bulb on Hyundai I10
How to Replace Front Headlight Bulb on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this very simple video guide, you will learn how to remove the front headlight bulb of a Hyundai I10. The removal process takes a few minutes and …
How to replace the bulb in the Hyundai I10 headlight
How to replace the bulb in the Hyundai I10 headlight
Hyundai I10 (2013-2020 / IA, MK 2) Replacing the front headlight bulb of the Hyundai I10 is a simple and quick operation to be carried out independently. The steps to follow are: - ope…
How to replace the headlight bulb of the Hyundai I10.
How to replace the headlight bulb of the Hyundai I10.
Hyundai I10 (2007-2013 / PA, MK 1) Below are the instructions on how to disassemble and replace the headlight bulb of the Hyundai I10. First, open the hood of the car and start by remo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos