Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on a 2013 Hyundai I10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Light bulb

Replacing the left fog light bulb on a Hyundai I10 involves a few simple steps that you can carry out independently. To replace the bulb, you need to: - lift the vehicle; - remove the lower side panel; - disconnect the connector from the bulb; - remove the bulb; - insert the new bulb; - reconnect the connector; - refit the lower side panel; Before lowering the vehicle, check if the right fog light bulb also needs replacing and, if necessary, follow the same steps.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Front Headlight Bulb on Hyundai I10
How to Replace Front Headlight Bulb on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this very simple video guide, you will learn how to remove the front headlight bulb of a Hyundai I10. The removal process takes a few minutes and …
How to replace the bulb in the Hyundai I10 headlight
How to replace the bulb in the Hyundai I10 headlight
Hyundai I10 (2013-2020 / IA, MK 2) Replacing the front headlight bulb of the Hyundai I10 is a simple and quick operation to be carried out independently. The steps to follow are: - ope…
How to Replace the Front Headlight Bulb on Hyundai I10
How to Replace the Front Headlight Bulb on Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) To replace the front headlight bulb on the Hyundai I10, open the bonnet to access the engine compartment and rotate the protective cap at the rear of…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos