Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I10
  6. : Car stereo

Hyundai I10 - Car stereo

Hyundai I10 (2007-2013 / PA, MK 1)
How to replace the car radio in the Hyundai I10

In today's video we see how to proceed to release the original car radio in the Hyundai I10. More precisely, we operate on the basic model equipped with a …read all…
Posted on 15 May 2023 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to manually set the time of Hyundai I10

To manually set the exact time on your 2018 Hyundai i10 takes just a few seconds. By following this new mini-guide you will have no difficulty in completing …read all…
Posted on 29 December 2022 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How do you remove the car radio from the Hyundai I10?

In order to replace the car radio of the Hyundai I10 you need to pry a thin object so that you can remove the plastic cover that wraps the car radio and the …read all…
Posted on 28 August 2022 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
Disassembly of the car radio on Hyundai I10

Removing the car stereo on Hyundai I10, as on most car models, is really very simple and now we will show you. First you need to remove the frame from the …read all…
Posted on 4 April 2024 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How to disassemble the car stereo on Hyundai I10 MK1 (2009)

Let's find out in this guide how to remove the original car radio or stereo on the Hyundai I10 first series, from 2009. First we get on board the car and start …read all…
Posted on 9 March 2024 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
Hyundai I10 disassemble car radio

Let's disassemble the car radio on Hyundai I10, let's see how it disassembles from above the dashboard. We detach the surround of the stereo with a plastic …read all…
Posted on 19 December 2023 by ScegliAuto

Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos