Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Disassembly of the car radio on Hyundai I10

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 2, IA - Years 2013-2020
Part: Car stereo
Operation: Disassembly of the car radio on Hyundai I10

Removing the car stereo on Hyundai I10, as on most car models, is really very simple and now we will show you. First you need to remove the frame from the frame by prying it into the slot with a plastic wedge. Once you have managed to extract this plastic, unscrew the now uncovered bolts that secure the car radio in place. At this point, remove the radio and disconnect the rear cables (if you are unable to extract it, also remove the air vents). The video also shows you an upgrade to switch to an on-board computer, but if that doesn't interest you, proceed backwards to assemble a car stereo equivalent to the original.


Posted on 4 April 2024 by ScegliAuto



How do you remove the car radio from the Hyundai I10?
Hyundai I10 (2013-2020 / MK 2, IA) In order to replace the car radio of the Hyundai I10 you need to pry a thin object so that you can remove the plastic cover that wraps the car radio
How to disassemble the car stereo on Hyundai I10 MK1 (2009)
Hyundai I10 (2007-2013 / MK 1, PA) Let's find out in this guide how to remove the original car radio or stereo on the Hyundai I10 first series, from 2009. First we get on board the car
How to replace the car radio in the Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) In today's video we see how to proceed to release the original car radio in the Hyundai I10. More precisely, we operate on the basic model equipped w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos