Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Radio in a Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Car stereo

In today's video, we will see how to remove the original radio in the Hyundai I10. Specifically, we are working on the base model equipped with a removable front panel, but the procedure does not vary based on this. First, get a screwdriver or a plastic spatula to assist you. Remove the trim by releasing the securing clips. You will then see the radio structure in front of you. Pull it out carefully, taking care of the power connectors and the antenna. Once done, you can proceed to replace it with a new unit.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai I10 (2013-2020 / IA, MK 2) To replace the radio in a Hyundai I10, use a thin object to pry off the plastic cover that surrounds the radio and air vents. Once the clips securing…
Hyundai I10 (2013-2020 / IA, MK 2) In this tutorial we can see how to replace the car stereo in the Hyundai I10, an extremely simple and quick operation. Before proceeding, make sure t…
Hyundai I10 (2007-2013 / PA, MK 1) Remove the radio from the Hyundai I10 by taking it out from above the dashboard. Use a plastic lever to detach the trim around the stereo, where the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos