Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Car stereo

Remove the radio from the Hyundai I10 by taking it out from above the dashboard. Use a plastic lever to detach the trim around the stereo, where the air vents are located on the sides. Once the stereo is free from constraints, use a screwdriver to unscrew the securing screws on either side. Pull the stereo out by hand and disconnect the cables (power and antenna). Take the new radio, connect the electrical terminals, and insert everything back into the dashboard. Finally, refit the plastic cover trim.

Updated on 27 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Radio from a Hyundai I10?
How to Remove the Radio from a Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To replace the radio in a Hyundai I10, use a thin object to pry off the plastic cover that surrounds the radio and air vents. Once the clips securing…
Removing the Car Radio on Hyundai I10
Removing the Car Radio on Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) Removing the car radio on a Hyundai I10, like most car models, is really simple. First, you need to remove the trim by levering in the slot with a pl…
How to Replace the Radio in a Hyundai I10
How to Replace the Radio in a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In today's video, we will see how to remove the original radio in the Hyundai I10. Specifically, we are working on the base model equipped with a rem…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos