Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Dashboard

See other generations:
Video tutorial

Today's guide will show you how to remove and replace the entire dashboard of the Hyundai I10. First, get in the vehicle and start unscrewing the screws securing the instrument cluster and the glove compartment to remove them; then remove the side plastics and subsequently dismantle the steering wheel by removing the airbag and unscrewing the central bolt.

At this point, remove the entire central instrumentation by unscrewing the dashboard screws to detach it from the cabin; this will allow access to the heater radiator, applying the reverse procedure for reassembly!


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to reset the Service light on a Hyundai i10?
How to reset the Service light on a Hyundai i10?
Hyundai I10 (2013-2020 / MK 2, IA) To reset the Service light on a Hyundai i10, turn on the ignition so you can navigate the menu. Press the TRIP button located on the right side of th…
Removing the Radio from a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Remove the radio from the Hyundai I10 by taking it out from above the dashboard. Use a plastic lever to detach the trim around the stereo, where the …
How to Remove the Gear Knob of a Hyundai I10
How to Remove the Gear Knob of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos