Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : How to replace the radiator on Hyundai I10?

Hyundai I10 - Video tutorial

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Radiator
Operation: How to replace the radiator on Hyundai I10?

In order to replace the radiator of the Hyundai I10 you have to loosen all the screws that secure the front bumper. These will be located inside the wheel arches, in the upper part of the bumper and also in its lower part. After the bumper has been detached, the connectors on the rear part of the bumper will need to be disconnected in order to remove it completely. At this point, it will be possible to access the radiator, which must be removed from its housing by disconnecting the connectors and pipes connected to it. Finally, it can be removed after loosening the fixing bolts, replacing it with a new spare part.


Posted on 18 March 2024 by ScegliAuto

    Frequently Asked Questions

    • I10 2013-2020 - Where is the radiator cap of the Hyundai I10 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos