Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the cooling radiator of the Hyundai I20 1.4 CRDI.

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Radiator

Today we will see the main information that will allow us to disassemble and replace the engine cooling radiator of the Hyundai I20 1.4 CRDI. First of all, we open the car's engine hood and start disassembling and removing the front bumper; then we unscrew the radiator fixing screws, also disconnecting the coolant pipes (letting it drain into a container), as shown in the video. At this point, we disconnect the electrical connector of the temperature sensor and the fan, removing and replacing the radiator with the new one!

Posted on 6 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Adjusting the Timing Chain of the Hyundai i20 1.4 CRDI
Guide to Adjusting the Timing Chain of the Hyundai i20 1.4 CRDI
Hyundai I20 (2008-2014 / MK 1, PB) This guide briefly outlines the steps to adjust the timing chain of the Hyundai i20 1.4 CRDI. After removing all components and the timing cover, you…
Guide to Replacing the Timing Chain on the Hyundai i20
Guide to Replacing the Timing Chain on the Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) Below are the necessary instructions on how to dismantle and replace the timing chain on the Hyundai i20. First, open the bonnet and begin removing t…
Location and Procedure for Replacing the Cabin Air Filter on the Hyundai i20 Mk2
Location and Procedure for Replacing the Cabin Air Filter on the Hyundai i20 Mk2
Hyundai I20 (2014-2021 / GB, IB, MK 2) This guide shows the location and procedure for replacing the cabin air filter on the Hyundai i20 Mk2. The first step is to remove the glove compartm…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos