Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Adjusting the Timing Chain of the Hyundai i20 1.4 CRDI

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Timing belt

This guide briefly outlines the steps to adjust the timing chain of the Hyundai i20 1.4 CRDI. After removing all components and the timing cover, you will need to remove the chain; however, first take the necessary references for the subsequent timing. Note that there is a mark on the camshaft sprocket that must be perfectly aligned with the references on the chain and the engine cover; remove and replace the timing chain, following the video tutorial to the end!

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Chain on the Hyundai i20
Guide to Replacing the Timing Chain on the Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) Below are the necessary instructions on how to dismantle and replace the timing chain on the Hyundai i20. First, open the bonnet and begin removing t…
Guide to replacing the cooling radiator of the Hyundai I20 1.4 CRDI.
Guide to replacing the cooling radiator of the Hyundai I20 1.4 CRDI.
Hyundai I20 (2008-2014 / MK 1, PB) Today we will see the main information that will allow us to disassemble and replace the engine cooling radiator of the Hyundai I20 1.4 CRDI. First o…
Guide to removing the timing chain on the Hyundai i20
Guide to removing the timing chain on the Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) This guide provides the main instructions for removing and replacing the timing chain on the Hyundai i20. First, open the bonnet and start by removin…

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - After how many km do you change the timing chain in the Hyundai i20? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos