Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to removing the timing chain on the Hyundai i20

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Timing belt

This guide provides the main instructions for removing and replacing the timing chain on the Hyundai i20. First, open the bonnet and start by removing the spark plugs and the intake manifold; then remove the cylinder head cover and the timing cover, first removing the crankshaft pulley and the V-belt. At this point, take the necessary references to remove the timing chain, which can be found on the engine cover; replace the chain with a new one and reassemble everything!

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Chain on the Hyundai i20
Guide to Replacing the Timing Chain on the Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) Below are the necessary instructions on how to dismantle and replace the timing chain on the Hyundai i20. First, open the bonnet and begin removing t…
Guide to Adjusting the Timing Chain of the Hyundai i20 1.4 CRDI
Guide to Adjusting the Timing Chain of the Hyundai i20 1.4 CRDI
Hyundai I20 (2008-2014 / MK 1, PB) This guide briefly outlines the steps to adjust the timing chain of the Hyundai i20 1.4 CRDI. After removing all components and the timing cover, you…
Removing the Timing Belt on Hyundai I20
Removing the Timing Belt on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) In this video tutorial, you will see the main instructions for removing the timing belt on a Hyundai I20. First, lift the bonnet of your car; then re…

Other guides you may be interested in

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - After how many km do you change the timing chain in the Hyundai i20? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos