Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gasket of the cylinder head cover of the Hyundai I10 1.0L

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Cylinder head

Today we will see the main instructions on how to disassemble and replace the gasket of the cylinder head cover of the Hyundai I10 1.0L. First, we open the hood of the car and start by disconnecting the intake hose, then disconnecting the pipes and spark plug coils; then we unscrew the screws of the cylinder head cover, removing the old gasket as shown in the video. At this point, we clean the base of the cover and the base of the cylinder head, applying the new original gasket; we reassemble the cover and all the previously disassembled elements.

Posted on 25 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plugs from Your Hyundai I10
How to Remove the Spark Plugs from Your Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Do you want to remove the spark plugs from your Hyundai I10? Let's see how to proceed in this video. Pull the lever to open the engine compartment an…
Instructions for Replacing the Timing Chain on the Hyundai I10 1.2
Instructions for Replacing the Timing Chain on the Hyundai I10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) In today's guide, you will see the main instructions for removing and replacing the timing chain on the Hyundai I10 1.2 petrol. First, open the bonne…
Guide to Replacing the Timing Chain on the Hyundai I10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) The instructions in this guide will outline the main steps for removing and replacing the timing chain on the Hyundai I10 1.2. First, open the engine…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos