Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plugs from Your Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Spark plugs

See other generations:
Video tutorial

Do you want to remove the spark plugs from your Hyundai I10? Let's see how to proceed in this video. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the air intake filter covering the cylinder head, then disconnect the clips from the coils by hand, unscrew the coils with your socket wrench, and pull them out from the cylinder head.

Take the new spark plugs and insert them into the cylinder head using the extension of the socket wrench, tighten them, and reconnect the relevant power clips. Finally, refit the soundproofing panel and close the engine bonnet.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Hyundai I10 1.1
How to Replace the Spark Plugs on a Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) Discover in this video the procedure for removing and replacing the engine spark plugs on the first series Hyundai I10, with a 1.1 petrol engine. Fir…
How to Change the Spark Plugs on a Hyundai I10 1.1
How to Change the Spark Plugs on a Hyundai I10 1.1
Hyundai I10 (2013-2020 / MK 2, IA) In today's tutorial video, you will learn how to remove and replace the engine spark plugs on the Hyundai I10, both first and second series, with a 1…
Replacing Spark Plugs on Hyundai I10 1.2 MPI
Replacing Spark Plugs on Hyundai I10 1.2 MPI
Hyundai I10 (2019-2026 / AC3, AI3) Following the instructions in this guide, you will learn how to replace the spark plugs on the Hyundai I10 1.2 MPI. First, open the bonnet of the veh…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos