Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Hyundai I10 1.2 MPI

Model: Hyundai I10 AI3, AC3 - Years 2019-2026
Part: Spark plugs

Following the instructions in this guide, you will learn how to replace the spark plugs on the Hyundai I10 1.2 MPI. First, open the bonnet of the vehicle and begin to remove the air filter box by disconnecting the intake hose and unscrewing the fastening screws located at the base; then disconnect the spark plug connectors, using a socket wrench with an extension to unscrew and remove them, as shown in the video. At this point, install the new spark plugs of the correct type and with the same thread pitch, screwing them in gently by hand and then tightening them with a torque wrench.

Posted on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Hyundai I10
How to Replace the Spark Plugs on a Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) Replacing the spark plugs on a Hyundai I10 is possible by opening the bonnet and accessing the engine bay: you will need to loosen the screws that se…
How to Replace Spark Plugs on Hyundai I10
How to Replace Spark Plugs on Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) This brief video tutorial shows how to replace the spark plugs on a Hyundai I10 mk2 1.1 litres, model produced from 2013 to 2020. This operation shou…
How to Replace the Spark Plugs on a Hyundai I10 1.1
How to Replace the Spark Plugs on a Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) Discover in this video the procedure for removing and replacing the engine spark plugs on the first series Hyundai I10, with a 1.1 petrol engine. Fir…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos