Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : How to replace spark plugs on Hyundai I10

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 2, IA - Years 2013-2020
Part: Spark plugs
Operation: How to replace spark plugs on Hyundai I10

Let's see in this short video tutorial how to replace the spark plugs on a Hyundai I10 mk2 1.1 liters, model produced from 2013 to 2020. This operation, on this engine must be performed every 60,000 km, and as we now see it is very simple to also run independently. The spark plugs are positioned between the exhaust manifold and the filter box as we can also see in the video, so first we go to detach the ignition coils and then using a 16 wrench we go to remove the old spark plugs simply by unscrewing them. Once this is done, we screw in the new spark plugs and reinsert their coils to finish the job.


Posted on 27 April 2024 by ScegliAuto



How to change the spark plugs on the Hyundai I10 1.1
Hyundai I10 (2013-2020 / MK 2, IA) In today's video tutorial we will see how to remove and replace the engine spark plugs on the Hyundai I10, first and second series, with 1.1 petrol e
How to replace spark plugs in a Hyundai I10 Mk1
Hyundai I10 (2007-2013 / MK 1, PA) In this video tutorial we can see how to replace the spark plugs in a Hyundai I10 Mk1 by following a few simple steps: the first thing to do is to ge
How to replace the spark plugs on the Hyundai I10 1.1
Hyundai I10 (2007-2013 / MK 1, PA) Let's find out in this video the procedure necessary for the disassembly and replacement of the engine spark plugs on the Hyundai I10 first series, w

Other guides that may interest you

    Frequently Asked Questions

    • I10 2013-2020 - Where are the spark plugs of the Hyundai I10 Mk2 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos