Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spark Plugs on a Hyundai I10

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Spark plugs

See other generations:
Video tutorial

Let's see how to change the spark plugs on a Hyundai I10 (specifically a 2015 model). Work with the engine cold, and it is advisable to disconnect the battery; remove the engine cover, identify the spark plugs, which are lined up on the cylinder head, each with a thick ignition cable in a single cord.

Pull only on the rubber stem and never on the cable itself. Clean the area around the spark plug with a brush to prevent dirt from falling into the cylinder.

Unscrew the old spark plug by turning it counterclockwise; install the new spark plug and tighten it with a torque wrench to 20–30 Nm. Refit the cables, applying a small amount of dielectric grease inside the rubber cap. Reconnect each cable until you hear the "click" of the connection, replace the engine cover, and reconnect the battery.


Posted on 15 August 2026 by ScegliAuto


Related tutorials

How to Change the Spark Plugs on a Hyundai I10 1.1
How to Change the Spark Plugs on a Hyundai I10 1.1
Hyundai I10 (2013-2020 / MK 2, IA) In today's tutorial video, you will learn how to remove and replace the engine spark plugs on the Hyundai I10, both first and second series, with a 1…
How to Replace Spark Plugs on Hyundai I10
How to Replace Spark Plugs on Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) This brief video tutorial shows how to replace the spark plugs on a Hyundai I10 mk2 1.1 litres, model produced from 2013 to 2020. This operation shou…
Replacing Spark Plugs on Hyundai I10 1.2 MPI
Replacing Spark Plugs on Hyundai I10 1.2 MPI
Hyundai I10 (2019-2026 / AC3, AI3) Following the instructions in this guide, you will learn how to replace the spark plugs on the Hyundai I10 1.2 MPI. First, open the bonnet of the veh…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos