Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spark Plugs on a Hyundai I10 1.1

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Spark plugs

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the engine spark plugs on the Hyundai I10, both first and second series, with a 1.1 petrol engine. First, open the bonnet of your car and remove the ignition coil connectors, using pliers if necessary.

Then, use a socket wrench with an extension to unscrew and remove the spark plugs, as shown in the video. At this point, replace them with new ones of the correct type and thread pitch, screwing them in by hand before tightening with a spanner, following the video until the end for reassembly!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on Hyundai I10
How to Replace Spark Plugs on Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) This brief video tutorial shows how to replace the spark plugs on a Hyundai I10 mk2 1.1 litres, model produced from 2013 to 2020. This operation shou…
How to Remove the Spark Plugs from Your Hyundai I10
How to Remove the Spark Plugs from Your Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Do you want to remove the spark plugs from your Hyundai I10? Let's see how to proceed in this video. Pull the lever to open the engine compartment an…
How to Change the Spark Plugs on a Hyundai I10
How to Change the Spark Plugs on a Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) Let's see how to change the spark plugs on a Hyundai I10 (specifically a 2015 model). Work with the engine cold, and it is advisable to disconnect th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos