Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Instructions to replace the timing chain on the Hyundai I10 1.2

Hyundai I10 - Video tutorial

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Timing belt
Operation: Instructions to replace the timing chain on the Hyundai I10 1.2

In today's guide we will see the main instructions that will allow us to disassemble and replace the timing chain on the petrol Hyundai I10 1.2. First we open the engine hood of our car and start by removing the air filter box; then we remove the cylinder head cover, and the one on the distribution side, unscrewing all the fixing screws with a socket wrench, in order to access the timing chain. At this point we are going to get all the necessary references; then we remove the camshafts and remove the timing chain, in order to replace it!


Posted on 19 February 2024 by ScegliAuto

    Frequently Asked Questions

    • I10 2013-2020 - When to replace the timing belt in the Hyundai I10? Read Answer
    • I10 2013-2020 - How much does it cost to replace the timing belt of a Hyundai I10? Read Answer
    • I10 2013-2020 - What is the cost for the timing chain for the Hyundai I10? Read Answer
    • I10 2013-2020 - When does the timing belt of a Hyundai i10 need to be replaced? Read Answer
    • I10 2007-2013 - After how many years to replace the timing belt of the Hyundai i10 Read Answer
    • I10 2007-2013 - How many km to replace the timing belt of the Hjundai i10? Read Answer
    • I10 2007-2013 - How many km do you replace the timing belt of the Hyundai I10 1.1? Read Answer
    • I10 2007-2013 - How much does the third service cost to the Hyundai I10? Read Answer
    • I10 2007-2013 - How many kilometers should the distribution be replaced on the Hyundai I10? Read Answer
    • I10 2007-2013 - After how many km it is necessary to change the timing belt of the Hyundai i10? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos