Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I10
  6. : How to remove front bumper on Hyundai I10

Hyundai I10 - Video tutorial

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Front bumper
Operation: How to remove front bumper on Hyundai I10

Is the front bumper broken? Let's take it apart on the front of a Hyundai I10. Let's lift the bonnet and put it in safety. With a socket wrench we unscrew the tightening screws located in the lower part of the bumper (if present). Once the screws in the lower part have been removed, lift the car with a jack and unscrew the screws of the stone guards. We remove the rivets at the top of the bumper. We remove the bumper from the car body. Once the old bumper has been removed, we fix the new bumper on the car body with our hands (we connect the power supply terminals of the fog lights) and proceed to tighten all the screws and rivets.


Posted on 9 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos