Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Lights on the Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Fog lights

Today, in this tutorial video, you will learn how to remove and replace the bulbs and units of the front fog lights on the Hyundai I10. First, open the bonnet and start by removing the front bumper, unscrewing all the screws found at the top and bottom of the bumper. Now, unscrew the screws located on both sides of the wheel arches to remove the front bumper; then disconnect the electrical connectors of the fog light bulbs and unscrew the side screws to take off the entire unit; simply replace everything by applying the reverse procedure!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Third Brake Light on a Hyundai i10
Removing the Third Brake Light on a Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) In this short video tutorial, you will see instructions on how to remove the third brake light and replace its bulbs on a second series Hyundai i10, …
How to Change the Front Headlights on a Hyundai i10
How to Change the Front Headlights on a Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) Replace the front headlights if they are damaged and cannot be repaired. Here's how to disassemble them. Open the bonnet by pulling the bonnet releas…
Removing the Rear Bumper on a Hyundai i10
Removing the Rear Bumper on a Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) Is the rear bumper damaged? Let’s remove and replace it on a Hyundai i10. Using a screwdriver or battery-powered drill, unscrew the retaining screws …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos