Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlights on a Hyundai i10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Headlight

Replace the front headlights if they are damaged and cannot be repaired. Here's how to disassemble them. Open the bonnet by pulling the bonnet release lever and secure it. Unscrew the retaining screws above the headlight using a socket wrench. Disconnect the power connectors of the headlight. Remove the bulb holders from the headlight and extract the headlight from the vehicle body. Fit the new headlight with new bulbs if damaged (always of the correct type and size) and insert the headlight into its housing. Tighten the screws above the headlight with the socket wrench. Test the correct operation of the headlight bulbs after installation.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Hyundai I10?
How do you replace the headlight bulb of the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) It will be possible to replace the front headlight bulb of the Hyundai I10 by opening the hood to gain access to the components inside the engine com…
Removing the Front Headlights from the Hyundai I10
Removing the Front Headlights from the Hyundai I10
Hyundai I10 (2019-2026 / AI3, AC3) If you need to replace bulbs or change the entire unit, here’s how to remove the front headlight from the Hyundai I10. Open the bonnet, position your…
How to Remove the Front Door Panel of the Hyundai I10
How to Remove the Front Door Panel of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Follow this guide to dismantle and replace the front door panel of the Hyundai I10. First, open the front door and start removing the plastic caps lo…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos