Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Where are the fuses of the Hyundai I10 located?

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 1, PA - Years 2007-2013
Part: Fuse box
Operation: Where are the fuses of the Hyundai I10 located?

The fuses of the Hyundai I10 are divided inside the two fuse boxes that are installed inside the vehicle: in this model of car they are located inside the passenger compartment and inside the engine compartment. The first is located on the dashboard, below the steering column: it contains the fuses for the courtesy lights, wipers, dipped headlights, etc. The second fuse box is located on the right side of the engine compartment and contains the fuses for the cooling fan, power steering, central locking, etc.


Posted on 19 April 2024 by ScegliAuto



How to open the fuel door of the Hyundai i10.
Hyundai I10 (2013-2020 / MK 2, IA) As you can see very well in the video, opening the fuel door (gasoline) of your Hyundai I10 car is very simple. Unlike other cars where you simply pr
Where is the fuse box of the Hyundai I10 located?
Hyundai I10 (2007-2013 / MK 1, PA) The Hyundai I10 mk1 model, produced from 2007 to 2013, contains two fuse boxes. The first fuse box is located inside the engine compartment, specific
How to remove the gear knob of a Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) Before we can start, we will have to go and sit in the driver's seat of our Hyundai I10. So let's start by grabbing the gear knob with your hand. Aft

Other guides that may interest you

    Frequently Asked Questions

    • I10 2013-2020 - Why do the stops of the rear lights of a Hyundai I10 not come on? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos