Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlights from the Hyundai I10

Model: Hyundai I10 AI3, AC3 - Years 2019-2026
Part: Headlight

If you need to replace bulbs or change the entire unit, here’s how to remove the front headlight from the Hyundai I10. Open the bonnet, position yourself in front of the headlight to be removed, and using a 10mm spanner, unscrew the two bolts, one at the top on the wheel arch and one at the bottom near the radiator. Also, unscrew the plastic screws of the crossmember to gain more movement for removal. Release the lower bracket that prevents accidental removal and start detaching the headlight from its housing, finally disconnect the electrical connector.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlight on the Hyundai I10 MK1
Removing the Front Headlight on the Hyundai I10 MK1
Hyundai I10 (2007-2013 / PA, MK 1) In this short video, you will learn how to remove the front headlight and replace its bulbs on the Hyundai I10 first series, following these simple s…
How to disassemble the front headlight of the Hyundai i10
How to disassemble the front headlight of the Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) The instructions provided in this guide will show us the procedure for disassembling and replacing the front headlight of the Hyundai I10. First, we …
How to Remove the Front Headlamp of the Hyundai I10?
How to Remove the Front Headlamp of the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To remove the front headlamp of the Hyundai I10, open the bonnet to access the components at the top of the engine bay. Here, you will find the screw…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos