Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo on the Hyundai I10 MK1 (2009)

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

In this guide, you will discover how to remove the original radio or stereo on the first series Hyundai I10 from 2009. First, get in the vehicle and start prying at the sides of the air vents to remove them; you will then find the screws for the radio brackets located both at the top and bottom, as shown in the video.

Once the screws are removed, you can extract the stereo by disconnecting the power connector found at the back; simply reassemble everything by applying the reverse procedure of disassembly!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Remove the radio from the Hyundai I10 by taking it out from above the dashboard. Use a plastic lever to detach the trim around the stereo, where the …
How to Remove the Gear Knob of a Hyundai I10
How to Remove the Gear Knob of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…
When to Replace the Timing Belt of a Hyundai i10?
When to Replace the Timing Belt of a Hyundai i10?
Hyundai I10 (2007-2013 / PA, MK 1) The timing belt replacement for a first generation Hyundai i10 (2007-2013), whether with a 1.1 MPI (petrol) or a 1.2 MPI (petrol) engine, is recommen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos