Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Pump

Hyundai I10 - Pump

Hyundai I10 (2013-2020 / IA, MK 2)
Replacing the water pump on Hyundai I10
Raise the hood and secure it. As shown in the video, the water pump is located next to the engine compartment, on the passenger side and behind the alternator …read all…
Posted on 16 February 2024 by ScegliAuto
Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos