Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Hyundai i10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Battery

This video tutorial shows you how to replace the battery in a Hyundai i10. The first battery is located in the engine bay, so the first step is to open the bonnet and secure it with the appropriate stay. At this point, you can easily locate the car battery on the right. Proceed to unscrew the bolts of the bracket at the base of the battery and then remove it using the handle provided. Once the old battery is removed, clean the terminals and the area where the battery sits. Now, you can insert the new battery; the video recommends an SF Sonic 1440 35LBH battery. Secure the battery to the base of the bracket by tightening the bolts and connecting the terminals.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Hyundai I10?
How to replace the battery of the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To replace the battery of the Hyundai I10, open the bonnet to access the components inside the engine compartment. On the right side, you will locate…
How do you change the battery in a Hyundai I10 1.2mpi 2017?
How do you change the battery in a Hyundai I10 1.2mpi 2017?
Hyundai I10 (2013-2020 / IA, MK 2) Changing the battery on a 2017 Hyundai i10 1.2 MPI is quite simple, but it requires attention. First of all, turn off the car and make sure the light…
Clutch Replacement on the Hyundai I10 1.1 Petrol
Clutch Replacement on the Hyundai I10 1.1 Petrol
Hyundai I10 (2007-2013 / PA, MK 1) In this video tutorial, discover the steps to perform a DIY clutch change on the first series Hyundai I10 with a 1.1 petrol engine. First, lift the v…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos