Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Condition of a Hyundai I10 1.1

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Checks and maintenance

This video tutorial shows how to perform a general check of the engine on a Hyundai I10 1.1 petrol. The first thing to check to verify the engine's condition is the oil level; open the bonnet and pull out the dipstick, wiping it with a dry cloth, then reinsert it to check the actual level. Next, check the coolant level in the designated reservoir, which should always be at the maximum level; then check the brake fluid, located in the appropriate reservoir. The video also shows how to replace the air filter!

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Engine Condition of a Hyundai I10 1.0
How to Check the Engine Condition of a Hyundai I10 1.0
Hyundai I10 (2007-2013 / PA, MK 1) Below are the steps that will allow you to perform a general check of the engine condition of the Hyundai I10 1.0. First, open the bonnet and check t…
How and When to Change the Timing Belt on the Hyundai I10 1.1
How and When to Change the Timing Belt on the Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) This brief guide provides the main instructions on how and when to change the timing belt on the first-generation Hyundai I10 with a 1.1 petrol engin…
How do you adjust the clutch of the Hyundai I10?
How do you adjust the clutch of the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) In order to adjust the clutch of the Hyundai I10, you need to open the hood so that you can access the components located inside the engine compartme…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos