Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the IAC valve on a Hyundai i10.

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Checks and maintenance

In this video, we will see how to clean the IAC (Idle Air Control) valve on a Hyundai I10. This component is used to regulate the airflow by bypassing the throttle when the engine is at idle. When the IAC valve has problems, the idle RPM can become irregular, and there may be difficulties starting the engine; in fact, the engine can stall when the accelerator is released, and the idle may be too high. One possible cause of malfunction is dirt, so we will remove it from its housing and clean it with an electrical connector cleaner, not with thinner, and then we can reinstall it in its place.

Posted on 17 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change LPG Filters - on a BRC System - on a Hyundai I10
How to Change LPG Filters - on a BRC System - on a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) To replace the LPG filters on a BRC system fitted to a Hyundai I10, you need to change both the liquid phase filter and the gas phase filter. First, …
How to Clean the Air Duct and Throttle Body on a Hyundai I10 1.1
How to Clean the Air Duct and Throttle Body on a Hyundai I10 1.1
Hyundai I10 (2013-2020 / IA, MK 2) In this video tutorial, you will learn how to disassemble and clean the air duct and throttle body on the second series Hyundai I10, with a 1.1 petro…
How to Clean the Throttle Body on the Hyundai I10?
How to Clean the Throttle Body on the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To clean the throttle body on the Hyundai I10, start by loosening the two clamps located at both ends of the connection tube between the air filter a…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos