Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Air Duct and Throttle Body on a Hyundai I10 1.1

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Throttle body

In this video tutorial, you will learn how to disassemble and clean the air duct and throttle body on the second series Hyundai I10, with a 1.1 petrol engine. First, open the bonnet and start by removing the air filter box, unscrewing the fixing screws; then remove the intake hose from the throttle body, as shown in the video. At this point, unscrew the throttle body screws, disconnecting its electrical connector; then clean it using appropriate degreasers. Finally, refit everything!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Throttle Body on the Hyundai I10?
How to Clean the Throttle Body on the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To clean the throttle body on the Hyundai I10, start by loosening the two clamps located at both ends of the connection tube between the air filter a…
How to replace the thermostat of the Hyundai I10 1.2
How to replace the thermostat of the Hyundai I10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) In this guide we will see the main instructions useful for disassembling and replacing the thermostat of the Hyundai I10. First, open the hood and st…
How to clean the MAP sensor of the Hyundai i10
How to clean the MAP sensor of the Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) In this video we see how to clean the MAP (Manifold Absolute Pressure) sensor of a Hyundai I10: the sensor measures the absolute pressure of the inta…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos