Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel pump

See other generations:
Video tutorial

In this video tutorial, see how to replace the fuel pump on a Hyundai I10 by following some essential steps: first, get into the vehicle, turn off the car, and pull the handbrake. To access the fuel pump, you need to remove the rear seat (first push down and then back towards the boot to release it). Now remove the black cover using a flathead screwdriver to pry it off. Once the black cover is removed, disconnect the fuel pump by detaching the hoses and using pliers to remove the clips.

Remove the nuts with a 5/16 socket and an extension; once the nuts are unscrewed, you can remove the metal ring, and then the fuel pump can be taken out.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Hyundai i10 1.2
How to Replace the Fuel Pump on a Hyundai i10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) Briefly review the steps to remove and replace the fuel pump on the Hyundai i10 1.2. First, open the rear doors and begin removing the rear seat; und…
How to Replace the Fuel Filter on a Hyundai I10?
How to Replace the Fuel Filter on a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the fuel filter on a Hyundai I10, lift the rear seats to access the fuel pump located underneath. Remove the cover to gain access, then di…
How to Open the Fuel Flap on a Hyundai i10
How to Open the Fuel Flap on a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tan…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos