Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the front headlight of the Hyundai I30

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part: Headlight

In this video we can see how to disassemble the front headlight of the Hyundai I30: just open the front hood, and with a 12 mm socket, unscrew the screw located right above the grille. With a 10 mm socket we unscrew the screws located on the bracket inside the bodywork, and on the back of the headlight itself, which is held by a metal bracket. Remove the electrical connector located on the back of the headlight. Remove a socket screw located in the front wheel arch, and then, at the bottom of the vehicle, remove three screws on each side. We will have to remove the screws holding the hood protection from the top, and at this point we can loosen all the body parts and finally remove the headlight unit.

Posted on 4 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Hyundai I30 (2011-2016 / MK 2, GD) Today, you will learn the steps to remove the left front headlight of the Hyundai I30. The first step is to open the front bonnet by pulling the leve…
Hyundai I30 (2016-2024 / PD, MK 3) When one of the bulbs in the front headlight of the Hyundai i30 burns out, it is advisable to remove the headlight from its housing for easier replac…
Hyundai I30 (2011-2016 / MK 2, GD) To correctly and safely replace one of the bulbs in the front headlight of your Hyundai I30 second edition, you must follow all the steps described i…

Other guides you may be interested in

    Frequently Asked Questions

    • I30 2011-2016 - How do I replace the front bulb on the Hyundai I30? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos