Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the headlight of a Hyundai I30

Model: Hyundai I30 GD, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

In today's video, we will see how to disassemble the front headlight of a second generation Hyundai i30. We start by opening the engine compartment of our car and removing all the clips that secure the front plastic panel, then we use a wrench to unscrew the bumper fastening screws located under the vehicle's wheel arches.

Once this is done, we carefully detach the bumper as shown in the video, then we use 10mm and 12mm wrenches to remove all the screws holding the headlight in place.

At this point, we can disconnect the bulb connector from the back of the headlight and then remove it completely to replace it with a new one following the reverse procedure.


Posted on 21 February 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight of the Hyundai I30
How to Replace the Front Headlight of the Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) In this guide, we will see the instructions that will allow us to remove and replace the front headlight of the Hyundai I30. First, open the vehicle'…
How to Remove the Steering Wheel from a Hyundai i30?
How to Remove the Steering Wheel from a Hyundai i30?
Hyundai I30 (2007-2012 / MK 1, FD) To remove the steering wheel from a Hyundai i30, unscrew the screws located at the bottom of the steering wheel, both on the right and left sides. By…
How to Remove the Front Headlamp Bulb on Hyundai i30
How to Remove the Front Headlamp Bulb on Hyundai i30
Hyundai I30 (2007-2012 / MK 1, FD) To replace the front headlamp bulb, you will need to remove the headlamp. This is a relatively simple operation as the headlamp is not recessed compa…

Other guides you may be interested in

    Frequently Asked Questions

    • I30 2011-2016 - How do I replace the front bulb on the Hyundai I30? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos