Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Nissan Altima

Model: Nissan Altima L33 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Nissan Altima, lift the car with a jack so that the corresponding wheel is not in contact with the ground. Once the wheel is lifted, loosen the bolts that secure it to the hub and remove it to access the components behind it. Here you will find the brake caliper, which contains the pads: by unscrewing the mounting screws, you can detach the caliper and slide out the pads inside.

Then, install the new replacement parts by reassembling all the previously removed components.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the 2017 Nissan Altima
How to replace the engine air filter of the 2017 Nissan Altima
Nissan Altima (2013-2018 / L33) To correctly replace the engine air filter in your 2017 Nissan Altima, simply follow the steps described in our new guide. Fortunately, this is a rat…
How to Replace the Headlight on a Nissan Altima
How to Replace the Headlight on a Nissan Altima
Nissan Altima (2007-2012 / L32) To remove the headlight on a Nissan Altima, open the hood to access the rivets securing the headlight at the top. Once these rivets are removed, you …
How to Replace the Rear Shocks on a Nissan Altima?
How to Replace the Rear Shocks on a Nissan Altima?
Nissan Altima (2002-2006 / L31) To replace the rear shocks on a Nissan Altima, lift the car using a jack or lift so that the wheels are off the ground. Once lifted, you can loosen t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos