Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads on the Nissan Primastar.

Model: Nissan Primastar MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake pads

See other generations:
Video tutorial

In this guide, we will see how to disassemble and replace the front brake pads of the Nissan Primastar. First, we lift the vehicle and start by removing the front wheel; then we proceed to unscrew the two screws securing the front brake caliper, applying pressure to the caliper piston to remove it, as shown in the video.

At this point, we remove the old brake pads, cleaning the caliper of any residual dirt; we then install the new original brake pads, finally reassembling the caliper onto the disc. We will replace the other front brake pads in the same manner.


Posted on 22 December 2025 by ScegliAuto


Related tutorials

How do you reset the service light on the Nissan Primastar 2?
How do you reset the service light on the Nissan Primastar 2?
Nissan Primastar (2001-2016 / MK 1) In the attached video, we can see how to change the engine oil and oil filter of the Nissan Primastar 2. This is done after the Service light comes o…
How to Reset the Oil Change Light on a Nissan Primastar
How to Reset the Oil Change Light on a Nissan Primastar
Nissan Primastar (2001-2016 / MK 1) To reset the Oil Change light on a Nissan Primastar, insert the ignition key into the ignition barrel so that it can be turned on, illuminating the i…
How to reset the service light on the Nissan Primastar
How to reset the service light on the Nissan Primastar
Nissan Primastar (2001-2016 / MK 1) Let's see how to reset the service light of a Nissan Primastar: this procedure uses the onboard computer and the controls on the dashboard, and it is…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos