Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Nissan Altima

Model: Nissan Altima L32 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: V-belt

See other generations:
Video tutorial

Today, you will learn how to remove and replace the serpentine belt on a Nissan Altima by following these simple steps. First, lift the vehicle and start by removing the right front wheel; then, remove the front wheel well by unscrewing all the fastening screws, as shown in the video.

At this point, loosen the tensioner using a 14 mm socket wrench; now remove and replace the belt with a new one of the correct type, making sure to properly insert it between the pulleys. Finally, reassemble everything!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Remove the Alternator from the Nissan Altima 2.5L
How to Remove the Alternator from the Nissan Altima 2.5L
Nissan Altima (2013-2018 / L33) In this brief guide, you will find instructions to remove and replace the alternator on the Nissan Altima 2.5 liters. First, open the hood and start …
How to Replace the Serpentine Belt on a Nissan Altima?
How to Replace the Serpentine Belt on a Nissan Altima?
Nissan Altima (2007-2012 / L32) .. In this tutorial, you will see how to replace the serpentine belt on a Nissan Altima, a very simple operation. First, open the hood... …
How to replace the alternator of the Nissan Altima
How to replace the alternator of the Nissan Altima
Nissan Altima (2007-2012 / L32) Below we will see the main instructions on how to disassemble and replace the alternator of the Nissan Altima. First, open the hood of the car and st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos