Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator of the Nissan Altima

Model: Nissan Altima L32 - Years 2007-2012
Part: Alternator

Below we will see the main instructions on how to disassemble and replace the alternator of the Nissan Altima. First, open the hood of the car and start by removing the upper plastic cover of the engine, then also remove the air intake; then disconnect the battery and later also the wiring of the alternator, as shown in the video. At this point, unscrew the fixing screws of the alternator, in order to remove it; replace it with the new original one, fixing it correctly and making the connection, finally connecting the belt.

Posted on 21 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Alternator from the Nissan Altima 2.5L
How to Remove the Alternator from the Nissan Altima 2.5L
Nissan Altima (2013-2018 / L33) In this brief guide, you will find instructions to remove and replace the alternator on the Nissan Altima 2.5 liters. First, open the hood and start …
How to replace the engine air filter of the 2017 Nissan Altima
How to replace the engine air filter of the 2017 Nissan Altima
Nissan Altima (2013-2018 / L33) To correctly replace the engine air filter in your 2017 Nissan Altima, simply follow the steps described in our new guide. Fortunately, this is a rat…
Where are the fuses located in the Nissan Altima?
Where are the fuses located in the Nissan Altima?
Nissan Altima (2007-2012 / L32) On the Nissan Altima, the fuses are contained within the appropriate fuse boxes that are present on the vehicle: there are two of these, one located …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos