Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Alternator on a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Alternator

See other generations:
Video tutorial

In this video, see how to replace the alternator on a Nissan Juke 1: first, disconnect the negative battery terminal, then lift the car and remove the front right wheel (the side from which you will access the alternator). Remove the plastic wheel arch liner (held only by cross screws and clips).

Disconnect the alternator by removing the electrical connector and unscrewing the positive cable clamp. Loosen the drive belt using a 14 mm socket on the tensioner pulley (this may be a good opportunity to replace these two components if they are worn), turning it clockwise to loosen, then remove the belt from the alternator.

Unscrew the two mounting bolts (14 mm upper, 12 mm lower), and swing the alternator forward to extract it. In the meantime, obtain the new alternator, for example, from Ovoko, with code 23100BV80A at a price of £29.99 + £24.99 shipping. Position the new alternator and screw in the bolts without fully tightening; replace the belt on the pulley, tension the belt, turn the tensioner pulley counterclockwise and secure with the bolt.

Reconnect the positive cable and the electrical connector, reattach the wheel and wheel arch liner, and reconnect the battery. It’s time to start the engine to check that everything is in order.


Posted on 18 February 2026 by ScegliAuto


Related tutorials

Nissan Juke (2010-2019 / MK 1) Today's main steps will show you how to remove and replace the timing chain on the Nissan Juke 1.6. First, open the vehicle's bonnet and start removi…
Nissan Juke (2010-2019 / MK 1) Each fuse in the Nissan Juke is located within one of the respective fuse boxes present in the vehicle: in this type of vehicle, you can find three b…
Nissan Juke (2010-2019 / MK 1) In this video, you will see where the oil filter is located on a Nissan Juke and how to proceed if you need to replace it, a simple operation necessa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos