Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the alternator of the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Alternator

In order to replace the alternator of the Nissan Qashqai, you will need to open the hood so that you can access the components located inside the engine compartment: here you will find the alternator that can be removed by loosening the screws that hold it in place. You will also need to disconnect the connectors that are attached to it, so that it can be completely removed from its housing: the new replacement part can then be inserted and properly secured and connected, also repositioning the belt around it.

Posted on 2 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator in the Nissan Qashqai
How to Replace the Alternator in the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) In today's video, learn how to replace the alternator in the second series Nissan Qashqai; this tutorial also applies to the contemporaneous X-Trail …
How to Replace the Ignition Barrel of the Nissan Qashqai
How to Replace the Ignition Barrel of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Follow the instructions below to remove and replace the ignition barrel of the Nissan Qashqai. First, get into the vehicle and remove the plastic cov…
How do you replace the timing chain of the Nissan Qashqai?
How do you replace the timing chain of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Inside the Nissan Qashqai, the timing belt replacement is carried out by opening the hood, so that access to the components located inside the engine…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos