Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Nissan Juke

Model: Nissan Juke MK 2 - Years 2019-2026
Part: Battery

To replace the battery in a Nissan Juke, switch off the vehicle, open the bonnet, and locate the battery in the engine compartment. Remove any protective elements that limit access. First, loosen the negative terminal (?) and disconnect it, then proceed with the positive terminal (+). Unscrew the support or bracket holding the battery in place and carefully lift it out of its location. Position the new battery, ensuring it has compatible specifications and dimensions for the vehicle, especially for versions equipped with Start&Stop. Secure it again with the bracket and connect the terminals in reverse order: positive first, then negative. Tighten the terminals properly, reattach the protections, and start the vehicle to check the operation of the electrical systems.

Posted on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Nissan Juke remote control.
How to replace the battery of the Nissan Juke remote control.
Nissan Juke (2010-2019 / MK 1) To replace the battery in a remote control for a Nissan Juke, we need to slide the button located on the back of the remote and remove the top part c…
Replacing the Battery in a Nissan Juke
Replacing the Battery in a Nissan Juke
Nissan Juke (2010-2019 / MK 1) In this video, see how to replace the car battery in a Nissan Juke. It is located in the engine compartment, so in a conventional position. Open the …
How to Replace the Remote Battery in a Nissan Juke
How to Replace the Remote Battery in a Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide shows how to replace the remote battery in a Nissan Juke. To perform this operation, you need a small flathead screwdriver. After extracti…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos