Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Open and lift the bonnet, then give the top of the battery a light clean. Start by undoing the bolts that secure the metal crossbar above the battery, which will free the top of the battery.

Next, undo the bolts securing the connectors on the battery terminals, allowing you to remove both the negative and positive cables from the battery. Once done, you can lift the battery out and replace it with the new one. Finally, follow the steps in reverse to reassemble the removed components, and you're done!


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacing the Battery in a Nissan Juke
Replacing the Battery in a Nissan Juke
Nissan Juke (2010-2019 / MK 1) In this video, see how to replace the car battery in a Nissan Juke. It is located in the engine compartment, so in a conventional position. Open the …
How to Replace the Key Battery of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Below are the few simple steps you need to follow to correctly replace the battery inside your Nissan Juke key. First, you need to have a new CR2025 …
How to Replace the Key Battery for a 2021 Nissan Juke
How to Replace the Key Battery for a 2021 Nissan Juke
Nissan Juke (2019-2026 / MK 2) To safely and quickly replace the exhausted battery inside your 2021 Nissan Juke key, follow the procedure outlined in this guide. First, obtain a fl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos