Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Chain on the Nissan Juke 1.6

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Timing belt

Today's main steps will show you how to remove and replace the timing chain on the Nissan Juke 1.6. First, open the vehicle's bonnet and start removing the engine mount and the alternator belt, so that you can subsequently remove the timing cover; to access it, you will need to unscrew the fixing screws located on the sides, as shown in the video. At this point, remove the timing chain by unscrewing the screws and checking the wear condition of the pulleys and guides; then reassemble everything, following the video tutorial to the end!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the timing chain cover of the Nissan Juke 1.6
How to remove the timing chain cover of the Nissan Juke 1.6
Nissan Juke (2010-2019 / MK 1) In this guide, we will see the steps that will allow us to remove the timing chain cover of the Nissan Juke 1.6. First, lift the vehicle and start by…
Timing Chain Replacement on Nissan Juke
Timing Chain Replacement on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replacing the timing chain on the Juke. Here’s how to proceed. Lift the car on a column lift and remove the front wheel, then the right splash guard.…
Replacing the Timing Chain on a Nissan Juke
Replacing the Timing Chain on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replacing the timing chain on a Nissan Juke. Lift the front bonnet and remove the cover. Remove the front wheel and take off the right wheel arch lin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos