Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Engine Mount on the Nissan Sentra

Model: Nissan Sentra MK 6, B16 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine mount

See other generations:
Video tutorial

In this guide, you will learn how to remove and replace the engine mount on the Nissan Sentra. First, open the hood of the vehicle and start by removing the upper plastic engine cover.

Disconnect the hose located above the engine mount, as shown in the video. Next, lift the engine from below using a jack, then proceed to remove the engine mount by unscrewing the mounting bolts.

Replace it with the new original part, securing it correctly, and then lower the jack to complete the replacement process!


Posted on 21 August 2026 by ScegliAuto


Related tutorials

Where to Find the Cabin Fuse Box on a 2013 Nissan Sentra
Nissan Sentra (2012-2022 / B17, MK 7) To easily and safely locate the cabin fuse box on your 2013 Nissan Sentra, follow these steps. First, open the driver's side door and remove the plas…
How to Replace the Timing Chain on a Nissan Sentra?
How to Replace the Timing Chain on a Nissan Sentra?
Nissan Sentra (2000-2006 / B15, MK 5) To replace the timing chain on a Nissan Sentra, completely remove the engine from its housing. Once the engine is removed, detach the side and top co…
Replacement of the starter motor for the Nissan Sentra.
Replacement of the starter motor for the Nissan Sentra.
Nissan Sentra (2012-2022 / B17, MK 7) Today's main instructions will show us how to disassemble and replace the starter motor of the Nissan Sentra. First, let's open the hood and locate t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos