Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Engine Mount on the Nissan Altima

Model: Nissan Altima L32 - Years 2007-2012
Part: Engine mount

In this video tutorial, you will learn how to remove and replace the rear engine mount on the Nissan Altima, following the instructions below. First, lift the vehicle and locate the engine mount next to the exhaust manifold; then use a socket wrench to remove the bolts from the mount bracket to take it off, as shown in the video. At this point, replace the mount with a new one, using the original part; clean the brackets before reassembling everything, following the video tutorial to the end!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Light Bulbs on the Nissan Altima
How to Replace the Tail Light Bulbs on the Nissan Altima
Nissan Altima (2007-2012 / L32) Here is the guide on how to disassemble and replace the tail light and its bulbs on the Nissan Altima. First, open the trunk lid and start removing t…
How to Replace the Outside Rearview Mirror on a Nissan Altima
How to Replace the Outside Rearview Mirror on a Nissan Altima
Nissan Altima (2007-2012 / L32) To replace the outside rearview mirror on a Nissan Altima, loosen the screws securing the door panel: these are located inside the handle recess and …
How to Replace the Rear Headlight Bulb on a Nissan Altima
How to Replace the Rear Headlight Bulb on a Nissan Altima
Nissan Altima (2013-2018 / L33) To replace the rear headlight bulb on a Nissan Altima, open the trunk to access the cargo area. On the side corresponding to the headlight with the b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos