Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Control Arm on a Nissan Altima

Model: Nissan Altima L32 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Control arm

See other generations:
Video tutorial

In today's video tutorial, we will see how to remove and replace the control arm on a Nissan Altima, following the instructions below. First, lift the vehicle and remove the front wheel by unscrewing the bolts; then, unscrew the nut of the control arm pivot located behind the brake rotor, as shown in the video.

At this point, remove the control arm pivot to take it out; now, replace it with the new one that is suitable for your vehicle, and then reassemble everything. Perform the same operation to replace the other control arm!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Shocks on a Nissan Altima
Replacing the Rear Shocks on a Nissan Altima
Nissan Altima (2013-2018 / L33) In this guide, we will provide instructions to remove and replace the rear shocks on a Nissan Altima. First, lift the vehicle and start by removing t…
How to Replace the Tail Light Bulbs on the Nissan Altima
How to Replace the Tail Light Bulbs on the Nissan Altima
Nissan Altima (2007-2012 / L32) Here is the guide on how to disassemble and replace the tail light and its bulbs on the Nissan Altima. First, open the trunk lid and start removing t…
Replacing the Cabin Air Filter on the Nissan Altima
Replacing the Cabin Air Filter on the Nissan Altima
Nissan Altima (2007-2012 / L32) In this brief and simple guide, follow the procedure to remove and replace the cabin air filter on the Nissan Altima. First, access the passenger sid…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos