Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light Bulbs on the Nissan Altima

Model: Nissan Altima L32 - Years 2007-2012
Part: Tail light bulb

Here is the guide on how to disassemble and replace the tail light and its bulbs on the Nissan Altima. First, open the trunk lid and start removing the carpet lining found on the side, behind the light, by removing the plastic clips. Then, remove the light from the body by disconnecting the bulb's electrical connector, as shown in the video. At this point, replace the stop light bulb, turn signal bulb, and reverse light bulb; reassemble the lights and then the tail light, applying the reverse procedure!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs in the Nissan Altima?
How to Replace the Rear Headlight Bulbs in the Nissan Altima?
Nissan Altima (2007-2012 / L32) Replacing the rear headlight bulbs in the Nissan Altima is a very simple task; let's see how to proceed in this tutorial. First, move the carpet in t…
How to Replace the Rear Headlight Bulb on a Nissan Altima
How to Replace the Rear Headlight Bulb on a Nissan Altima
Nissan Altima (2013-2018 / L33) To replace the rear headlight bulb on a Nissan Altima, open the trunk to access the cargo area. On the side corresponding to the headlight with the b…
How to replace the taillight bulb of the Nissan Altima
How to replace the taillight bulb of the Nissan Altima
Nissan Altima (2018-2026 / L34) If the rear taillight bulb of your Nissan Altima (latest model) has suddenly stopped working and you want to find out how to replace it quickly and c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos