Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install an Additional Spoiler on the Nissan Altima

Model: Nissan Altima L33 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Body

See other generations:
Video tutorial

To customize your vehicle by installing an additional rear spoiler, follow the instructions below and refer to the images in the video: First, open the trunk and remove the clips securing the interior trim of the hatch. Then, take the template sheet for positioning and mark the precise point where you will drill the hole in the body for the passage of the electrical wires.

Next, take the new spoiler, remove the protective film from the adhesive, thread the wires through the hole you made earlier, and secure the spoiler. Open the hatch again, locate the connection wire for the third brake light, and connect the additional stop light.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2004 Nissan Altima
Where to Find the Fuse Box of the 2004 Nissan Altima
Nissan Altima (2002-2006 / L31) If you haven't been able to locate the box that contains all the various fuses in your 2004 Nissan Altima, don't worry because below we will provide …
How to replace the engine air filter of the 2017 Nissan Altima
How to replace the engine air filter of the 2017 Nissan Altima
Nissan Altima (2013-2018 / L33) To correctly replace the engine air filter in your 2017 Nissan Altima, simply follow the steps described in our new guide. Fortunately, this is a rat…
How to Locate the Fuses in a Nissan Altima
How to Locate the Fuses in a Nissan Altima
Nissan Altima (2018-2026 / L34) To locate the fuses in a Nissan Altima, open the driver’s side door and remove the side cover of the dashboard to access the internal fuse box, where…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos