Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Control Arm on the Nissan Sunny

Model: Nissan Sunny N17 - Years 2011-2020
Part: Control arm

This guide provides instructions to remove and replace the control arm on the Nissan Sunny. First, lift the vehicle and remove the front wheel. Then, disconnect the main pin of the control arm, using a puller if available, as shown in the video. Next, unscrew the bolts located upstream of the control arm to remove it and replace it with the new one. Secure it properly and replace the worn ball joints if necessary, following the video tutorial to the end!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Sunny (2011-2020 / N17) Today, let's go through the steps to remove and replace the suspension arm of the Nissan Sunny, following the instructions below. First, lift the veh…
Nissan Sunny (1990-2000 / B13) The air filter is one of the most important components in the engine compartment of your Nissan Sunny. Here’s how to replace it with a simple procedu…
Nissan Sunny (2011-2020 / N17) To replace the headlight bulb on a Nissan Sunny, open the hood to access the components in the engine compartment. Here, at the back of the headlight…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos