Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper from the Nissan Juke

Model: Nissan Juke - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bumper

See other generations:
Video tutorial

Removing the rear bumper from a Nissan Juke takes about 30 to 40 minutes and requires some screwdrivers and plastic tools. Start with the wheel arches, removing the push clips inside; this is necessary to access the screw that connects the bumper to the side of the car. To access the screws underneath, it is necessary to remove the rear light clusters.

Open the tailgate and unscrew the bolts that secure the lights, then disconnect the electrical connectors and pull the lights outwards. Under the car along the lower edge of the bumper, you will find several plastic clips and bolts securing the component to the chassis; all must be removed.

Now, pull the side edges of the bumper outwards to disengage it from the snap clips on the side. Now you can pull the bumper away from the car, disconnecting the wiring for the parking sensors, number plate light, and rear camera (if present).


Posted on 4 November 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Nissan Juke?
How to Remove the Front Bumper of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To remove the front bumper of the Nissan Juke, you need to detach the outer covers of the wheel arches, allowing access to all the screws underneath:…
How to Remove the Front Bumper on a Nissan Juke
How to Remove the Front Bumper on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) In this video, see how to remove the front bumper on a Nissan Juke: lift the bonnet and secure it. Use a plastic or metal lever to remove the securin…
How to Remove the Front Headlights from a Nissan Juke
How to Remove the Front Headlights from a Nissan Juke
Nissan Juke (2010-2019 / MK 1) For DIY maintenance enthusiasts, here is a video showing how to independently remove the front headlights from a Nissan Juke. As we can see, the oper…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos